Instance (G.8032); Cisco Asr 9000 Series Aggregation Services Router Vpn And Ethernet Services Command Reference, Release - Cisco ASR 9000 Series Reference Manual

Multipoint Layer 2 Services Commands

instance (G.8032)

To configure a G.8032 Ethernet ring instance and enter Ethernet ring G.8032 instance configuration submode,
use the instance command in the Ethernet ring G.8032 configuration submode. To disable the G.8032 Ethernet
ring instance, use the no form of this command.
instance instance-id
no instance instance-id
Syntax Description
instance-id
Command Default
None
Command Modes
Ethernet ring G.8032 configuration submode
Command History
Release
Release 4.1.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
l2vpn
Examples This example shows how to configure G.8032 Ethernet ring instance:
RP/0/RSP0/CPU0:router#configure
RP/0/RSP0/CPU0:router(config)# l2vpn
RP/0/RSP0/CPU0:router(config-l2vpn)# ethernet ring g8032 r1
RP/0/RSP0/CPU0:router(config-l2vpn-erp)# instance 1
RP/0/RSP0/CPU0:router(config-l2vpn-erp-instance)#
Instance ID; currently, supports up to two instances per Ethernet ring. The
instance ID can be 1 or 2.

Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release

Modification
This command was introduced.
Operation
read, write

instance (G.8032)

6.1.x
265