Cisco Asr 9000 Series Aggregation Services Router Vpn And Ethernet Services Command Reference, Release - Cisco ASR 9000 Series Reference Manual

Provider Backbone Bridge Commands
interface GigabitEthernet0/0/0/2
shutdown
!
interface GigabitEthernet0/0/0/3
shutdown
!
interface GigabitEthernet0/0/0/4
shutdown
!
l2vpn
bridge group bg12
bridge-domain bd1
interface GigabitEthernet0/0/0/0.1
!
interface GigabitEthernet0/0/0/0.2
!
pbb edge i-sid 1000 core-bridge bd2
!
!
!
!
end
!
The following example shows the output of the show l2vpn bridge-domain command:
##sh l2vpn bridge-domain m mac-address
Mac Address
------------------------------------------------------------------------------------------
0002.0003.0004 static
0006.0007.0008 static
To resynchronize the MAC table from the network processors, use the l2vpn resynchronize forwarding
Note
mac-address-table location <r/s/i> command.
Related Commands
Command
bridge-domain (VPLS), on page 240
bridge group (VPLS), on page 242
pbb, on page 420
l2vpn, on page 100
static-mac-address 0002.0003.0004
static-mac-address 0006.0007.0008 bmac 0004.0005.0006
Type Learned from/
Filtered on Resync Age
Gi0/0/0/0.1
BD id: 0

Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release

mroute
LC learned Mapped to
N/A
N/A
Description
Establishes a bridge domain, and enters L2VPN bridge group bridge
domain configuration mode.
Creates a bridge group so that it can contain bridge domains and
then to assign network interfaces to the bridge domain.
Configures the provider backbone bridge core or edge.
Enters L2VPN configuration mode.
static-mac-address
N/A N/A
N/A 0004.0005.0006
6.1.x
457