Show Spanning-Tree Repag Topology-Change Flushes - Cisco ASR 9000 Series Reference Manual

Multiple Spanning Tree Protocol Commands

show spanning-tree repag topology-change flushes

To display details of the last topology change that occurred for each pair of port and instance, as well as a
count of the number of topology changes at each port, use the show spanning-tree repag topology-change
flushes command in the EXEC mode.
Note The latest filter displays only the most recent topology change for each instance. The output also displays
information of the flush operation that takes place when the flush containment is active on an MSTI for
a port.
show spanning-tree repag protocol instance identifier topology-change flushes [instance id] [interface
type interface-path-id| latest]
Syntax Description
protocol instance identifier
topology-change
flushes
instanceid
interface type
interface-path-id
latest
Command Default
None
Command Modes
EXEC
Command History
Release
Release 3.7.1
String of a maximum of 25 characters that identifies the protocol instance.
Displays topology change information.
Displays latest topology change flushes for each interface.
Forward interface in rack/slot/instance/port format.
Interface type. For more information, use the question mark (?) online help
function.
Physical interface or virtual interface.
Note
For more information about the syntax for the router, use the question mark
(?) online help function.
Displays the most recent topology change for each instance.
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
show spanning-tree repag topology-change flushes
Use the show interfaces command to see a list of all interfaces
currently configured on the router.
Modification
This command was introduced.
6.1.x
621