VXLAN Commands
interface nve
To create a network virtualization endpoint (NVE) interface and enter the NVE interface configuration mode,
use the interface nve command in Global Configuration mode. To remove the NVE interface, use the no
form of this command.
interface nve nve-id
Syntax Description
nve-id
Command Default
None
Command Modes
Global Configuration
Command History
Release
Release 5.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
interface
Examples
The following example shows how to create an NVE interface and enter the NVE interface configuration
mode.
RP/0/RSP0/CPU0:router(config)# interface nve 1
RP/0/RSP0/CPU0:router(config-if)#
The NVE interface ID. It can take values from 1 to 65535.
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
Modification
This command was introduced.
Operation
read, write
interface nve
6.1.x
673