Mvrp Static - Cisco ASR 9000 Series Reference Manual

mvrp static

mvrp static
To enable Multiple VLAN Registration Protocol (MVRP) in static mode and to enter the MVRP configuration
submode, use the mvrp static command in the MSTP configuration mode. To return to the default setting,
use the no form of this command.
mvrp static
no mvrp static
Syntax Description
This command has no keywords or arguments.
Command Default
None
Command Modes
MSTP configuration
Command History
Release
Release 3.9.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
ethernet-services
Examples
The following example shows how to enable MVRP static mode:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# spanning-tree mst AA
RP/0/RSP0/CPU0:router(config-mstp)# mvrp static
RP/0/RSP0/CPU0:router(config-mvrp)#
Related Commands
Command
debug ethernet mvrp packets, on page 475
debug ethernet mvrp protocol, on page 477
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
546
Multiple Spanning Tree Protocol Commands
Modification
This command was introduced.
Operations
read, write
Description
Enables debugging of sent and received MVRP packets.
Enables MVRP protocol debugging on a specific interface,
location or vlan.