Cisco ASR 9000 Series Reference Manual page 663

Layer 2 Access List Commands
Examples
In the following example, a copy of access list list-1 is created as list-2:
RP/0/RSP0/CPU0:router# show access-list ethernet-service list-1
ethernet service access-list list-1
10 permit any any
20 permit 2.3.4 5.4.3
RP/0/RSP0/CPU0:router# copy access-list ethernet-service list-1 list-2
RP/0/RSP0/CPU0:router# show access-list ethernet-service list-2
ethernet service access-list list2
10 permit any any
20 permit 2.3.4 5.4.3
Related Commands
Command
deny (ES ACL), on page 650
ethernet-service access-group, on page 653
ethernet-services access-list, on page 655
permit (ES ACL), on page 657
resequence access-list ethernet-service, on page
660
show access-lists ethernet-services, on page 662
show access-lists ethernet-services trace, on page
666
show access-list ethernet-service usage pfilter,
on page 668
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
copy access-list ethernet-service
Description
Sets conditions for an Ethernet services access list
Controls access to an interface.
Defines an Ethernet services (Layer 2) access list by name.
Sets conditions for an Ethernet services access list.
Renumbers existing statements and increment subsequent
statements to allow a new Ethernet services access list
statement.
Displays the contents of current Ethernet services access
lists.
Displays Ethernet services access list trace information.
Identifies the modes and interfaces on which a particular
ACL is applied.
6.1.x
649