Show Spanning-Tree Mst Configuration - Cisco ASR 9000 Series Reference Manual

show spanning-tree mst configuration

show spanning-tree mst configuration
To display the VLAN ID to MSTI mapping table, use the show spanning-tree mst configuration command
in the EXEC mode.
show spanning-tree mst protocol instance identifier configuration
Syntax Description
protocol instance identifier
configuration
Command Default
None
Command Modes
EXEC
Command History
Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
interface
Examples The following example shows the output from the show spanning-tree mst command, which displays the
VLAN ID to MSTI mapping table:
RP/0/RSP0/CPU0:router# show spanning-tree mst a configuration
Name
Revision
Config Digest 9D-14-5C-26-7D-BE-9F-B5-D8-93-44-1B-E3-BA-08-CE
Instance
--------
0
1
------------------------------------------
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
594
leo
2702
Vlans mapped
-------------------------------
1-9,11-19,21-29,31-39,41-4094
10,20,30,40
String of a maximum of 25 characters that identifies the protocol
instance.
Displays a summary of MST related configuration.
Modification
This command was introduced.
Operations
read
Multiple Spanning Tree Protocol Commands