L2Vpn - Cisco ASR 9000 Series Reference Manual

l2vpn

l2vpn

To enter L2VPN configuration mode, use the l2vpn command in global configuration mode. To return to the
default behavior, use the no form of this command.
l2vpn
no l2vpn
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Global configuration
Command History
Release
Release 3.7.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Note All L2VPN configuration can be deleted using the no l2vpn command.
Task ID
Task ID
l2vpn
Examples The following example shows how to enter L2VPN configuration mode:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# l2vpn
RP/0/RSP0/CPU0:router(config-l2vpn)#
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
100
Point to Point Layer 2 Services Commands
Modification
This command was introduced.
Operations
read, write