bgp (EVPN)
This example shows how to enable BGP in the EVPN EVI configuration mode:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# evpn
RP/0/RSP0/CPU0:router(config-evpn)# evi 2
RP/0/RSP0/CPU0:router(config-evpn-evi)# bgp
RP/0/RSP0/CPU0:router(config-evpn-evi-bgp)#
Related Commands
Command
evpn, on page 400
evi, on page 398
route-target, on page 308
rd
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
390
Description
Enters EVPN configuration mode.
Enters the EVPN EVI configuration mode to configure optional BGP
settings for a bridge domain or EVI.
Specifies a route target for the VFI, PBB EVPN or EVPN bridge
domain.
Provider Backbone Bridge Commands