Priority (Mstp) - Cisco ASR 9000 Series Reference Manual

priority (MSTP)

priority (MSTP)
To set the bridge priority for the current MSTI, use the priority command in MSTI configuration submode.
priority priority
Syntax Description
priority
Command Default
priority: 32768
Command Modes
MSTI configuration
Command History
Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
interface
Examples The following example shows how to set the bridge priority to 8192 for the current MSTI:
RP/0/RSP0/CPU0:router(config-mstp-inst)# priority 8192
Related Commands
Command
debug spanning-tree mst packet, on page 479
debug spanning-tree mst protocol-state, on
page 481
instance (MSTP), on page 517
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
564
Bridge priority for the current MSTI. Range is 0 to 61440 in multiples of 4096.
Modification
This command was introduced.
Operations
read, write
Description
Enables debugging for sent and received MSTP packets.
Enables debugging protocol-state changes such as port role or
state changes, topology change notification.
Enters the multiple spanning tree instance (MSTI)
configuration submode.
Multiple Spanning Tree Protocol Commands