Show L2Vpn Nsr - Cisco ASR 9000 Series Reference Manual

Point to Point Layer 2 Services Commands

show l2vpn nsr

To display the status of l2vpn non-stop routing, use the show l2vpn nsr command in EXEC mode.
show l2vpn nsr [location| standby]
Syntax Description
location
standby
Command Default
None
Command Modes
EXEC
Command History
Release
Release 4.3.0
Release 6.1.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
l2vpn
Examples
The following example displays output for the show l2vpn nsr command:
RP/0/RSP0/CPU0:router# show l2vpn nsr
Mon May 30 19:32:01.045 UTC
L2VPN NSR information
NSR Status:
(Optional) Displays non-stop routing information for the specified location.
(Optional) Displays Standby node specific information.
NSR Ready
Last NSR Withdraw Time
Standby Connected
IDT Done
Number of XIDs sent
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
Modification
This command was introduced.
The show command output was updated.
Operation
read
: Fri May 27 10:50:59 UTC 2016 (3d08h ago)
: Fri May 27 10:50:59 UTC 2016 (3d08h ago)
: Fri May 27 10:50:59 UTC 2016 (3d08h ago)
: Fri May 27 10:50:59 UTC 2016 (3d08h ago)
: Virtual AC: 0
AC : 1
show l2vpn nsr
6.1.x
189