show l2vpn mstp port
Examples
The following sample output is from the show l2vpn mstp port command:
RP/0/RSP0/CPU0:router# show l2vpn mstp port interface gigabitethernet 0/1/0/0 msti 5
Related Commands
Command
spanning-tree mst, on page 623
spanning-tree mstag, on page 625
spanning-tree pvrstag, on page 629
spanning-tree pvstag, on page 631
spanning-tree mst, on page 623
spanning-tree mstag, on page 625
show l2vpn mstp vlan, on page 587
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
586
Multiple Spanning Tree Protocol Commands
Description
Enters the MSTP configuration submode
Enters the MST Access Gateway configuration submode.
Enters the Per VLAN Rapid Spanning Tree Access Gateway
(PVRSTAG) configuration submode.
Enters the Per VLAN Spanning Tree Access Gateway (PVSTAG)
configuration submode.
Enters the MSTP configuration submode
Enters the MST Access Gateway configuration submode.
Displays the Multiple Spanning Tree Protocol (MSTP) state for
the virtual local area network (VLAN) on a given interface.