limit (VPLS)
RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd-mac)# limit
RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd-mac-limit)# maximum 100
RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd-mac-limit)# action shutdown
RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd-mac-limit)# notification both
Related Commands
Command
action (VPLS), on page 232
bridge-domain (VPLS), on page 240
bridge group (VPLS), on page 242
l2vpn, on page 100
mac (VPLS), on page 277
maximum (VPLS), on page 281
notification (VPLS), on page 295
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
276
Description
Configures bridge behavior when the number of learned MAC
addresses reaches the MAC limit configured.
Establishes a bridge domain, and enters L2VPN bridge group bridge
domain configuration mode.
Creates a bridge group so that it can contain bridge domains and then
to assign network interfaces to the bridge domain.
Enters L2VPN configuration mode.
Enters L2VPN bridge group bridge domain MAC configuration mode.
Configures the specified action when the number of MAC addresses
learned on a bridge is reached.
Specifies the type of notification that is sent when the number of
learned MAC addresses exceeds the configured limit.
Multipoint Layer 2 Services Commands