Cisco Asr 9000 Series Aggregation Services Router Vpn And Ethernet Services Command Reference, Release - Cisco ASR 9000 Series Reference Manual

debug ethernet mvrp packets
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
ethernet-services
Examples
The following example shows how to enable debugging of brief MVRP packets:
RP/0/RSP0/CPU0:router#debug ethernet mvrp packets brief
Thu Oct 28 02:56:35.048 DST
The following example shows how to enable debugging of full MVRP packets on a specific location:
RP/0/RSP0/CPU0:router#debug ethernet mvrp packets full location 0/0/CPU0
Mon Nov 15 20:02:13.636 PST
The following example shows how to enable debugging of brief MVRP packets received at a specific interface:
RP/0/RSP0/CPU0:router#debug ethernet mvrp packets brief direction received interface
gigabitEthernet 0/0/0/1
Thu Nov 25 21:09:01.986 PST
Related Commands
Command
debug ethernet mvrp protocol, on page 477
mvrp static, on page 546
show ethernet mvrp mad, on page 579
show ethernet mvrp statistics, on page 581
show ethernet mvrp status, on page 583

Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release

6.1.x
476
Multiple Spanning Tree Protocol Commands
Operations
read
Description
Enables MVRP protocol debugging on a specific interface,
location or vlan.
Enables Multiple VLAN Registration Protocol (MVRP) in static
mode.
Displays the current state of the Multiple Registration Protocol
(MRP) Attribute Declaration (MAD) component on a port.
Displays packet statistics per port.
Displays a summary of the VIDs that are declared or registered.