Cisco Asr 9000 Series Aggregation Services Router Vpn And Ethernet Services Command Reference, Release - Cisco ASR 9000 Series Reference Manual

neighbor (L2VPN)
This example shows a point-to-point IPv6 cross-connect configuration:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# l2vpn xconnect group l2vpn
RP/0/RSP0/CPU0:router(config-l2vpn-xc)# p2p rtrA_to_rtrB
RP/0/RSP0/CPU0:router(config-xc-p2p)# neighbor ipv6 1111:2222::cdef pw-id 1
This example shows how to set a source IPv6 address to a point-to-point IPv6 cross-connect :
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# l2vpn xconnect group l2vpn
RP/0/RSP0/CPU0:router(config-l2vpn-xc)# p2p rtrA_to_rtrB
RP/0/RSP0/CPU0:router(config-xc-p2p)# neighbor ipv6 1111:2222::cdef pw-id 1
RP/0/RSP0/CPU0:router(config-xc-p2p-pw)# source 1111:2222::abcd
Related Commands
Command
l2vpn, on page 100
p2p, on page 134
pw-class (L2VPN), on page 124
xconnect group, on page 227

Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release

6.1.x
116
Point to Point Layer 2 Services Commands
Description
Enters L2VPN configuration mode.
Enters p2p configuration submode to configure point-to-point
cross-connects.
Enters pseudowire class submode to define a pseudowire class
template.
Configures cross-connect groups.