Card Replacement Process
Disconnecting All Cables from the Enclosure
Warning
Removing the Antenna End Cap
Warning
Caution
Step 1
Cisco 3200 Series Router Hardware Upgrade Guide
2-2
Get user manuals:
See SafeManuals.com
Before you start working on rugged enclosures, disconnect all cables, including power, to avoid
damage to the unit.
Class 1 laser product. Statement 1008
To remove the antenna end cap of a Cisco 3230 Rugged Enclosure, follow these steps:
Attach an ESD-preventive wrist strap to your wrist and to a bare metal surface on the chassis.
Using a 3/8-inch socket wrench to loosen the four 1/4-20 bolts on the end cap.
bolts.
Figure 2-1
Antenna End Cap Bolts
Chapter 2
Replacing Cards in the Cisco 3230 ISR Rugged Enclosure
Figure 2-1
shows these
OL-15983-01