Port1 - Cisco ASR 9000 Series Reference Manual

port1

port1

To enable G.8032 for a specified ring port, use the port1 command in g8032 configuration port1 submode.
To disable, use the no form of this command.
port1 {interface interface name| none}
Syntax Description
interface interface name
none
Command Default
None
Command Modes
Ethernet ring g8032 configuration port1 submode
Command History
Release
Release 4.1.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
l2vpn
Examples
This example shows the output from the port1 command:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# l2vpn
RP/0/RSP0/CPU0:router(config-l2vpn)# ethernet ring g8032 g1
RP/0/RSP0/CPU0:router(config-l2vpn-erp)# port1 interface TenGigE 0/6/0/3
RP/0/RSP0/CPU0:router(config-l2vpn-erp-port1)#
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
6.1.x
300
Specifies physical Ethernet or Bundle Ethernet
interface. A physical port of the local node
connected to G.8032 ring. Enables G.8032 for the
specified physical port to form a closed ring.
Specifies local node endpoint of an open-ring.
Modification
This command was introduced.
Operation
read, write
Multipoint Layer 2 Services Commands