Multipoint Layer 2 Services Commands
rpl
To specify one ring port on local node being RPL owner, neighbor or next-neighbor, use the rpl command
in the Ethernet ring G.8032 instance configuration submode. To disable the port as RPL owner, neighbor or
next-neighbor, use the no form of this command.
rpl {port0| port1} {owner| neighbor| next-neighbor}
no rpl {port0| port1} {owner| neighbor| next-neighbor}
Syntax Description
port0
port1
owner
neighbor
next-neighbor
Command Default
None
Command Modes
Ethernet ring G.8032 instance configuration submode
Command History
Release
Release 4.1.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
l2vpn
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
Assigns port0 as RPL owner,
neighbor or next-neighbor.
Assigns port1 as RPL owner,
neighbor or next-neighbor.
Assigns port0 or port1 as RPL
owner.
Assigns port0 or port1 as neighbor.
Assigns port0 or port1 as next
neighbor.
Modification
This command was introduced.
Operation
read, write
rpl
6.1.x
313