Provider Backbone Bridge Commands
This example shows how to configure the MAC flushagain timer in the EVPN Timers configuration mode:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# evpn
RP/0/RSP0/CPU0:router(config-evpn)# timers
RP/0/RSP0/CPU0:router(config-evpn-timers)# flushagain 30
RP/0/RSP0/CPU0:router(config-evpn-timers)#
Related Commands
Command
evpn, on page 400
interface (EVPN), on page 410
timers, on page 458
recovery, on page 427
peering, on page 422
programming, on page 425
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
Description
Enters EVPN configuration mode.
Enters the EVPN Interface configuration mode.
Configures timers that affect the convergence of PBB EVPN
in failure scenarios.
Configures the recovery timer.
Configures the peering timer.
Configures the programming timer.
flushagain
6.1.x
405