Multiple Spanning Tree Protocol Commands
show spanning-tree repag bpdu interface
To display BPDU information from root (bridge ID, cost, and priority) and the BPDU information being sent
on the port (Bridge ID, cost, priority) specific to an MSTI, use the show spanning-tree repag bpdu interface
command in the EXEC mode.
show spanning-tree repag protocol instance identifier [bpdu interface type interface-path-id]
Syntax Description
protocol instance identifier
bpdu interface
type
interface-path-id
Command Default
None
Command Modes
EXEC
Command History
Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
interface
String of a maximum of 25 characters that identifies the protocol instance.
Displays multiple spanning tree BPDUs.
Interface type. For more information, use the question mark (?) online help
function.
Physical interface or virtual interface.
Note
For more information about the syntax for the router, use the question mark
(?) online help function.
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
show spanning-tree repag bpdu interface
Use the show interfaces command to see a list of all interfaces
currently configured on the router.
Modification
This command was introduced.
Operations
read
6.1.x
619