Cisco Asr 9000 Series Aggregation Services Router Vpn And Ethernet Services Command Reference, Release - Cisco ASR 9000 Series Reference Manual

neighbor (VPLS)
RP/0/RSP0/CPU0:router(config)# l2vpn
RP/0/RSP0/CPU0:router(config-l2vpn)# bridge group 1
RP/0/RSP0/CPU0:router(config-l2vpn-bg)# bridge-domain bar
RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd)# neighbor 10.1.1.2 pw-id 1000
RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd-pw)#
The following example shows how to configure the parameters for any pseudowire in L2VPN bridge group
bridge domain VFI configuration mode:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# l2vpn
RP/0/RSP0/CPU0:router(config-l2vpn)# bridge group 1
RP/0/RSP0/CPU0:router(config-l2vpn-bg)# bridge-domain bar
RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd)# vfi v1
RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd-vfi)# neighbor 10.1.1.2 pw-id 1000
RP/0/RSP0/CPU0:router(config-l2vpn-bg-bd-vfi-pw)#
Related Commands
Command
bridge-domain (VPLS), on page 240
bridge group (VPLS), on page 242
l2vpn, on page 100
mpls static label (VPLS), on page 287
pw-class , on page 306
static-mac-address (VPLS), on page 371
vfi (VPLS), on page 380

Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release

6.1.x
294
Description
Establishes a bridge domain, and enters L2VPN bridge group bridge
domain configuration mode.
Creates a bridge group so that it can contain bridge domains and
then to assign network interfaces to the bridge domain.
Enters L2VPN configuration mode.
Configures the MPLS static labels and the static labels for the access
pseudowire configuration.
Configures the pseudowire class template name to use for the
pseudowire.
Configures the static MAC address to associate a remote MAC
address with a pseudowire or any other bridge interface.
Configures virtual forwarding interface (VFI) parameters.
Multipoint Layer 2 Services Commands