Cisco Asr 9000 Series Aggregation Services Router Vpn And Ethernet Services Command Reference, Release - Cisco ASR 9000 Series Reference Manual

Multiple Spanning Tree Protocol Commands
Task ID
interface (MSTAG and REPAG only)
Examples The following example shows how to set the preempt delay for 20 seconds:
RP/0/RSP0/CPU0:router(config-mstag)# preempt delay for 20 seconds
Related Commands
Command
spanning-tree mstag, on page 625
spanning-tree pvrstag, on page 629
spanning-tree pvstag, on page 631
spanning-tree repag, on page 633
show spanning-tree mstag, on page 604
show spanning-tree pvrstag, on page 613
show spanning-tree pvstag, on page 615
show spanning-tree repag, on page 617

Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release

Operations
read, write
Description
Enters the MST Access Gateway configuration submode.
Enters the Per VLAN Rapid Spanning Tree Access Gateway
(PVRSTAG) configuration submode.
Enters the Per VLAN Spanning Tree Access Gateway (PVSTAG)
configuration submode.
Enters the Resilient Ethernet Protocol Access Gateway (REPAG)
configuration submode.
Displays the values currently used for populating the BPDUs sent
by all ports.
Displays the values currently used for populating the BPDUs sent
by all ports.
Displays the values currently used for populating the BPDUs sent
by all ports.
Displays the values currently used for populating the BPDUs sent
by all ports.
preempt delay
6.1.x
561