Revision (Mstp) - Cisco ASR 9000 Series Reference Manual

Multiple Spanning Tree Protocol Commands

revision (MSTP)

To set the revision level of the MSTP region, use the revision command in MSTP configuration submode.
revision revision-number
Syntax Description
revision-number
Command Default
revision-number: 0
Command Modes
MSTP configuration
Command History
Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
interface
Examples The following example shows how to set the revision level of the MSTP region to 10:
RP/0/RSP0/CPU0:router(config-mstp)# revision 10
Related Commands
Command
debug spanning-tree mst packet, on page 479
debug spanning-tree mst protocol-state, on
page 481
spanning-tree mst, on page 623
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
Revision level of the MSTP region. Range is 0 to 65535.
Modification
This command was introduced.
Operations
read, write
Description
Enables debugging for sent and received MSTP packets.
Enables debugging protocol-state changes such as port role
or state changes, topology change notification.
Enters the MSTP configuration submode
revision (MSTP)
6.1.x
571