Cisco Asr 9000 Series Aggregation Services Router Vpn And Ethernet Services Command Reference, Release - Cisco ASR 9000 Series Reference Manual

cost
Examples
The following example shows how to set the port cost to 10000:
RP/0/RSP0/CPU0:router(config-mstag-if-inst)# cost 10000
Related Commands
Command
debug spanning-tree mstag packet, on page
483
debug spanning-tree repag packet, on page
493
interface (MSTAG/REPAG), on page 523
instance (MSTAG/REPAG), on page 515
spanning-tree mstag, on page 625
spanning-tree repag, on page 633
show spanning-tree mstag, on page 604
show spanning-tree repag, on page 617

Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release

6.1.x
474
Multiple Spanning Tree Protocol Commands
Description
Enables MSTAG packet debugging.
Enables Resilient Ethernet Protocol (REP) Access Gateway
debugging commands.
Enter the MSTAG interface configuration submode, and enables
MSTAG for the specified port.
Enters MSTAG Instance configuration mode or REPAG
Instance configuration mode.
Enters the MST Access Gateway configuration submode.
Enters the Resilient Ethernet Protocol Access Gateway
(REPAG) configuration submode.
Displays the values currently used for populating the BPDUs
sent by all ports.
Displays the values currently used for populating the BPDUs
sent by all ports.