Instance (Mstag/Repag) - Cisco ASR 9000 Series Reference Manual

Multiple Spanning Tree Protocol Commands

instance (MSTAG/REPAG)

To enter MSTAG Instance configuration mode or REPAG Instance configuration mode, use the instance
command in MSTAG Interface or REPAG Interface configuration mode respectively.
instance id
Syntax Description
id
Command Default
None
Command Modes
MST AG interface configuration, REPAG interface configuration
Command History
Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
An instance ID of 0 represents the IST for the region.
Note
Task ID
Task ID
interface
Examples The following example shows how to enter MSTAG Instance configuration submode:
RP/0/RSP0/CPU0:router(config-mstag)# instance 101
RP/0/RSP0/CPU0:router(config-mstag-inst)#
MSTI ID. Range is 0 to 4094.
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
Modification
This command was introduced.
Operations
read, write
instance (MSTAG/REPAG)
6.1.x
515