Cisco ASR 9000 Series Reference Manual page 17

Ethernet Interfaces Commands
RP/0/RSP0/CPU0:router(config-if)# dot1q tunneling ethertype 0x9100
RP/0/RSP0/CPU0:router(config-if)#
The following example shows how to configure the Ethertype to 0x9200:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# interface GigabitEthernet 0/1/5/1
RP/0/RSP0/CPU0:router(config-if)# dot1q tunneling ethertype 0x9200
RP/0/RSP0/CPU0:router(config-if)#
Related Commands
Command
encapsulation dot1q, on page 8
encapsulation dot1ad dot1q, on page
6
encapsulation dot1q second-dot1q, on
page 10
encapsulation untagged, on page 12
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
Description
Defines the matching criteria to map 802.1Q frames ingress on an
interface to the appropriate service instance.
Defines the matching criteria to be used in order to map single-tagged
802.1ad frames ingress on an interface to the appropriate service
instance.
Defines the matching criteria to map Q-in-Q ingress frames on an
interface to the appropriate service instance.
Defines the matching criteria to map untagged ingress Ethernet frames
on an interface to the appropriate service instance.
dot1q tunneling ethertype
6.1.x
3