Cisco Asr 9000 Series Aggregation Services Router Vpn And Ethernet Services Command Reference, Release - Cisco ASR 9000 Series Reference Manual

Ethernet Interfaces Commands
The criteria for this command are: the outer tag must be unique and the inner tag may be a single VLAN, a
range of VLANs or lists of the previous two.
QinQ service instance, allows single, multiple or range on second-dot1q.
Only one encapsulation command must be configured per service instance.
Examples The following example shows how to map ingress frames to a service instance:
RP/0/RSP0/CPU0:router(config-if)# encapsulation dot1q second-dot1q 20
Related Commands
Command
encapsulation default, on page 4
encapsulation dot1ad dot1q, on page 6
encapsulation dot1q, on page 8
encapsulation untagged, on page 12

Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release

Description
Configure the default service instance on a port.
Defines the matching criteria to be used in order to map
single-tagged 802.1ad frames ingress on an interface to the
appropriate service instance.
Defines the matching criteria to map 802.1Q frames ingress on an
interface to the appropriate service instance.
Defines the matching criteria to map untagged ingress Ethernet
frames on an interface to the appropriate service instance.
encapsulation dot1q second-dot1q
6.1.x
11