Debug Platform Packet Protocol Lacp - Cisco Catalyst 4500 Series Configuration Manual
Ios software configuration guide isco ios xe 3.9.0e and ios 15.2(5)ex
Hide thumbs
Also See for Catalyst 4500 Series:
- Software configuration manual (2086 pages) ,
- Administration manual (1814 pages) ,
- Configuration manual (1610 pages)
Table of Contents
Advertisement
Chapter 2
Cisco IOS Commands for the Catalyst 4500 Series Switches
debug platform packet protocol lacp
To debug the LACP protocol packets, use the debug platform packet protocol lacp command. To
disable the debugging output, use the no form of this command.
Syntax Description
receive
transmit
vlan
Command Default
This command has no default settings.
Command Modes
Privileged EXEC mode
Command History
Release
12.1(8a)EW
Examples
The following example shows how to enable all PM debugging:
Switch# debug platform packet protocol lacp
Switch#
Related Commands
Command
undebug platform packet protocol lacp
(same as no debug platform packet
protocol lacp)
debug platform packet protocol lacp [receive | transmit | vlan]
no debug platform packet protocol lacp [receive | transmit | vlan]
(Optional) Enables the platform packet reception debugging functions.
(Optional) Enables the platform packet transmission debugging functions.
(Optional) Enables the platform packet VLAN debugging functions.
Modification
This command was introduced on the Catalyst 4500 series switch.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release XE 3.9.xE and 15.2(5)Ex
Description
Disables debugging output.
debug platform packet protocol lacp
2-171
Advertisement
Table of Contents
