Debug Spanning-Tree Mst Packet - Cisco ASR 9000 Series Reference Manual

Multiple Spanning Tree Protocol Commands

debug spanning-tree mst packet

To enable debugging for sent and received MSTP packets, use the debug spanning-tree mst packet command
in the EXEC mode. To disable debugging, use the no form of this command.
debug spanning-tree mst packet {brief| full} {sent| received} [interface interface-name]
no debug spanning-tree mst packet {brief| full} {sent| received} [interface interface-name]
Syntax Description
brief
full
sent
received
interface interface-name
Command Default
If an interface is not specified, then debug is enabled for all interfaces.
Command Modes
EXEC
Command History
Release
Release 4.0.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
interface
Enables brief debugging output.
Enables full debugging output.
Display packets being sent.
Display packets being received.
{Optional} Filters by interface.
Physical interface or a virtual interface.
Note
For more information about the syntax for the router, use the question mark (?)
online help function.
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
Use the show interfaces command to see a list of all possible interfaces
currently configured on the router.
Modification
This command was introduced.
Operations
read
debug spanning-tree mst packet
6.1.x
479