Vlan-Ids (Mstag/Repag) - Cisco ASR 9000 Series Reference Manual

Multiple Spanning Tree Protocol Commands

vlan-ids (MSTAG/REPAG)

To associate a set of VLAN IDs with the current MSTI, use the vlan-id command in MSTAG or REPAG
instance configuration submode.
vlan-id vlan-range [ vlan-range ] [ vlan-range ] [ vlan-range ]
Syntax Description
vlan-range
Command Default
None
Command Modes
MSTAG Instance configuration mode, REPAG Instance configuration mode.
Command History
Release
Release 3.7.1
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
Task ID
Task ID
interface
Examples
The following example shows how to use the vlan-id command:
RP/0/RSP0/CPU0:router(config-mstag-inst)# vlan-id 2-1005
Related Commands
Command
debug spanning-tree mstag packet, on page
483
debug spanning-tree repag packet, on page
493
List of VLAN ranges in the form a-b, c, d, e-f, g etc.
Cisco ASR 9000 Series Aggregation Services Router VPN and Ethernet Services Command Reference, Release
Modification
This command was introduced.
Operations
read, write
Description
Enables MSTAG packet debugging.
Enables Resilient Ethernet Protocol (REP) Access Gateway
debugging commands.
vlan-ids (MSTAG/REPAG)
6.1.x
643