Dip Switch Settings - Panasonic VB-9411ADSUK Operation Instructions Manual

CONNECTION OF OPTIONAL UNITS
Connecting the DISA OGM Unit
When you use a DISA OGM Unit, programming must be performed (See Telephone Type Setting
(10-25) 01# of MODE 4).
q Connect the internal line to the main unit using a DDK connector cable and secondary socket
(LJU).
w Connect the modular plug to the DISA OGM Unit and replace the DISA OGM Unit's top cover.
NOTE : When using only 1 line, connect the cable to Line 1.
WARNING
• Use a plier for tighten-
ing wires to DDK con-
nectors to prevent from
loose wiring.
• Do not bundle internal
lines and AC power
line or exchange lines
together outside the
CCU. Distance of 50cm
is required between
them to assure proper
functioning.

DIP Switch Settings

IMPORTANT
To register the contents of the Dip switches either:
q q q q q Turn off the main switch and turn it on again.
w w w w w Disconnect the main power on the line 1 side and connect it again.
Lithium Battery
w
Line 2
Secondary
Socket (LJU)
DDK connector
q
Extension connector
I-26
DISA OGM Unit SW 2-1
1 2 3 4 5 6 7 8
SW 1
1 2 3
SW 1-1
6
Line 1
1
2
3
L A B H
1 2 3 4
CCU
SW 2
ON
OFF
ON
OFF
1
Secondary
Socket (LJU)
6
5
4
DDK connector