For Call Waiting Service Uscis Soseccusssccctsssctasenspanintacassevesnusrtettusivieny - Panasonic KX-TSC50-B Operating Instructions Manual

=
3 Press (SEND/SET). l Flash tine
;700ms <
e The current setting is displayed.
Sue eau
4 Rotate (JOG DIAL) until the desired time is Flash time
displayed. ee 5;
SET=Save
5 Press (SEND/SET) (Save key). Flash time,
: ms
e Along beep sounds and the time is
saved.
e The display will return to the function list.
To return to the stand-by mode, press
or wait for 60 seconds.
e You can exit the programming mode any time by pressing (EXIT).
* If you are connected via a PBX, a longer flash time may be necessary to
use PBX functions (transferring a call, etc.). Consult with your PBX
supplier for the correct setting.
For Call Waiting Service Users
Press (CALL WAIT/FLASH) if you hear a call-waiting tone while talking.
e The first call is put on hold and you can answer the second call.
e To return to the first caller, press again.
e The call waiting service is not available when the parallel connected
telephone is in use.
e If this function does not operate properly, the flash time may not be set
correctly. Consult with your telephone company for details. See page 48 ©
on how to adjust the flash time.
Visual Call Waiting (Call Waiting ID) $ Service
D
=
Q)
3
O
D
Q
9
D
D
©
3
Visual Call Waiting (Call Waiting ID) Service meal va =
allows the unit to display the second caller's Sey o 3a
information. After you hear a call-waiting tone
while talking, the unit will display
" Call waiting -", and the caller's name and
phone number.
e Please contact your telephone company for details and availability in your
area.
49