Command Line Error Information - H3C S5810 Series Operation Manual

different commands. For example, if you execute the display cu command repeatedly, the system
saves only one command in the history buffer; if you execute the command in the format of display
cu and display current-configuration respectively, the system saves them as two commands.
Follow these steps to access history commands:
To do...
View the history commands
Access the previous history
command
Access the next history
command
You may use arrow keys to access history commands in Windows 200X and XP Terminal or Telnet.
However, the up-arrow and down-arrow keys are invalid in Windows 9X HyperTerminal, because they
are defined in a different way. You can press Ctrl+P or Ctrl+N instead.

Command Line Error Information

The commands are executed only if they have no syntax error. Otherwise, error information is reported.
Table 1-7 lists some common errors.
Table 1-7 Common command line errors
Error information
% Unrecognized command found at '^' position.
% Incomplete command found at '^' position.
% Ambiguous command found at '^' position.
Too many parameters
% Wrong parameter found at '^' position.
Use the key/command...
display history-command
Up-arrow key or Ctrl+P
Down-arrow key or Ctrl+N
The command was not found.
The keyword was not found.
Parameter type error
The parameter value is beyond the allowed
range.
Incomplete command
Ambiguous command,
Too many parameters
Wrong parameter
1-23
Result
Displays the commands that
you have entered
Displays the earlier history
command, if there is any.
Displays the next history
command, if there is any.
Cause