Command Line Error Information; Typing And Editing Commands - H3C S5120-SI Series Configuration Manual

<Sysname> display cl?
clipboard
clock
cluster

Command Line Error Information

If a command you typed contains syntax errors, the CLI reports error information.
common command line errors.
Table 1-3 Common command line errors
% Unrecognized command found at '^' position.
% Incomplete command found at '^' position.
% Ambiguous command found at '^' position.
Too many parameters
% Wrong parameter found at '^' position.

Typing and Editing Commands

Completing a partial command name
The H3C switch series supports completing a partial command name for efficient input of commands.
If in the current view, the character string you have typed can already uniquely identify a keyword, you
do not need to type the complete keyword.
For example, in user view, commands starting with an s include save, startup saved-configuration,
and system-view.
To save the current configuration, type sa.
To set the configuration file for next startup, type st s.
To enter system view, type sy.
You can also press Tab to have a partial keyword automatically completed, and check that the keyword
is the one you intended to use.
Editing command lines
Table 1-4 lists some shortcut keys you can use to edit command lines.
Table 1-4 Editing functions
Key
Common keys
Backspace
Error information
If the edit buffer is not full, insert the character at the position of the cursor and
move the cursor to the right.
Deletes the character to the left of the cursor and move the cursor back one
character.
The command was not found.
The keyword was not found.
The parameter type is wrong.
The parameter value is beyond the allowed range.
Incomplete command
Ambiguous command
Too many parameters
Wrong parameters
Function
1-15
Table 1-3 lists some
Cause