Outputting System Information To A Monitor Terminal - H3C S3100V2-52TP Configuration Manual

To do...
Enable information center
Name the channel with a
specified channel number
Configure the channel
through which system
information can be output to
the console
Configure the output rules of
system information
Configure the format of the
time stamp
Enabling the display of system information on the console
After setting to output system information to the console, you need to enable the associated display
function to display the output information on the console.
Follow these steps to enable the display of system information on the console (in user view):
To do...
Enable the monitoring of system
information on the console
Enable the display of debugging
information on the console
Enable the display of log
information on the console
Enable the display of trap
information on the console

Outputting system information to a monitor terminal

System information can also be output to a monitor terminal, which is a user terminal that has login
connections through the VTY user interface.
Outputting system information to a monitor terminal
To do...
Enter system view
Use the command...
info-center enable
info-center channel channel-number
name channel-name
info-center console channel
{ channel-number | channel-name }
info-center source { module-name |
default } channel { channel-number
| channel-name } [ debug { level
severity | state state } * | log { level
severity | state state } * | trap { level
severity | state state } * ] *
info-center timestamp { debugging
| log | trap } { boot | date | none }
Use the command...
terminal monitor
terminal debugging
terminal logging
terminal trapping
Use the command...
system-view
41
Remarks
Optional
Enabled by default
Optional
See Table 2 for default channel names.
Optional
By default, system information is output
to the console through channel 0
(known as console).
Optional
See "Default output rules of system
information."
Optional
The time stamp format for log, trap and
debugging information is date by
default.
Remarks
Optional
Enabled on the console and disabled on the
monitor terminal by default.
Required
Disabled by default
Optional
Enabled by default
Optional
Enabled by default
Remarks
—