Keithley 2461 Reference Manual page 99

Section 2: General operation Model 2461 Interactive SourceMeter® Instrument Reference Manual
Figure 51: Name Virtual Instrument dialog box
9. In the Virtual Instrument Name box, enter a name that you want to use to refer to the instrument.
10. Click Finish.
11. Click Cancel to close the Wizard.
12. Save the configuration. From the Keithley Configuration Panel, select File > Save.
Verify the instrument through the Keithley Communicator:
1. Click Start > All Programs > Keithley Instruments > Keithley Communicator.
2. Select File > Open Instrument to open the instrument you just named.
Figure 52: Keithley Communicator Open an Instrument
3. Click OK.
4. Send a command to the instrument and see if it responds.
2-72 2461-901-01 A/November 2015