Table of Contents
Advertisement
ARM9TDMI AC Characteristics
Timing parameter
Tltch
Tnwh
Tnws
Tpasd
Tpash
Trg0d
Trg0h
Trg1d
Trg1h
Trgen
Trsth
Trsts
Tsdnd
Tsdnh
Tshkf
Tshkr
Ttapidh
Ttapids
Ttbe
Ttbz
Ttckf
Ttckh
Ttckl
Ttckr
Ttdod
8-18
Description
LATECANCEL hold time from GCLK falling
nWAIT hold time from GCLK rising
nWAIT setup time to GCLK falling
PASS output delay from GCLK rising
PASS hold time from GCLK rising
RANGEOUT0 output delay
RANGEOUT0 output hold time
RANGEOUT1 output delay
RANGEOUT1 output hold time
RANGEOUT0/RANGEOUT1 falling delay from DBGEN falling
nRESET hold time from GCLK rising
nRESET setup time to GCLK rising
SDIN output delay from TCK falling
SDIN hold time from TCK falling
SHCLK1BS/SHCLK2BS falling from TCK changing
SHCLK1BS/SHCLK2BS rising from TCK changing
TAPID[31:0] hold time to TCK falling
TAPID[31:0] setup time to TCK falling
Delay from TBE rising, to outputs driven valid
Delay from TBE falling, to outputs high impedance
TCK1/TCK2 falling from TCK changing
Minimum TCK HIGH period
Minimum TCK LOW period
TCK1/TCK2 rising from TCK changing
TDO output delay from TCK falling
Copyright © 1998, 1999 ARM Limited. All rights reserved.
Table 8-1 ARM9TDMI timing parameters (continued)
ARM DDI0145B
Advertisement
Table of Contents
