Table of Contents
Advertisement
9. OPERATION OF THE VARIOUS SYSTEM MONITOR SCREENS
Chapter9 Operation of the various system monitor screens
This chapter contains an explanation of each screen operation when using the system
monitor function.
9.1 Screen configuration, common operations and changing screens when monitoring
The common operations of each monitor function such as screen configuration and
target PLC CPU specification when executing system monitoring are described below.
9.1.1 Basic screen configuration and key functions (menu)
The basic screen configuration displayed in the windows and the key functions
displayed on the screen are shown below.
(1) Display
(2) Key functions
POINT
With any of the four windows, when changing the station/monitor device or
executing the test operation, it is not possible to do an operation with another
window until that series of operations is finished.
DEV MON
BAT MON
BM MON
END
The functions of keys that are used with the basic screen operation are shown in
the chart below.
Key
The entry monitor is executed with the applicable window
DEV MON
(see Sec. 9.2.).
The batch monitor is executed with the applicable window
BAD MON
(see Sec. 9.3.).
The timer/counter monitor is executed with the applicable window
TC MON
(see Sec. 9.4.).
The buffer memory monitor is executed with the applicable window
BM MON
(see Sec. 9.5.).
System monitoring ends; display returns to the screen where
END
system monitors function started.
9 - 1
MELSEC
TC MON
Function
GOT
9
Advertisement
Table of Contents
