Description
3.1
Overview of the connectivity module
Note
The connectivity module and SIDRIVE IQ are used to monitor the state/condition of the
converter. The connectivity module cannot be used to influence the converter. The connectivity
module is not a remote maintenance system.
The connectivity module captures important operating and status data of the drive. The
captured data is preprocessed, transferred via a LAN interface, and made available in
SIDRIVE IQ for analysis.
SIDRIVE IQ - Drive System Connect Nano
The IPC captures the converter data and processes the data for transfer to SIDRIVE IQ.
Figure 3-1
Installed software
The connectivity module includes the following pre-installed software:
• Windows 10
• 7-zip
• SIEMENS Drive System Connect
• MindConnect Bridge
• MCB feeder
SINAMICS CONNECT 500
Operating Instructions, 06/2023
SIMATIC IPC127E
3
13