Generate & Transfer; Generate Hardware; Generate Lan; Generate Om : Mmi - Siemens TXP-CLC Manual

Exercise 8
Generate & Transfer
Compile all necessary code following the steps below:

Generate Hardware

Resolve errors
Close all open signal connections (see the following)
Generate Code for Functions Only (AP)
Resolve errors

Generate LAN

Resolve errors

Generate OM : MMI

Generate OM : BDM
Program IM308 EPROM/Flash Card using PG740
Configure CP1430 communications processor
Transfer LAN (AP)
Transfer AP (off-line)
Transfer OM : MMI : Transfer to Leading OT
Transfer OM : BDM
Verify proper operation of all logic
Copying of this document, and giving it to others and use or communication of the contents, are forbidden without express authority. Offenders are liable to the payment of
damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design.
Training Center
TXP CLC Course
12
1