Ink Replacement Method; When Ink Near End Is Displayed; When Ink End Is Displayed - MIMAKI TS100-1600 Operation Manual

1.5 Ink Replacement Method

When Ink Near End is Displayed

Ink levels are low. We recommend replacing with new Ink bottle as soon as possible. Printing is still possible,
but cleaning and continuous printing are not possible. Note that ink may run out during printing.
To check which Ink bottle needs to be replaced, press the [ENTER] key on the LOCAL mode screen.
"Displaying Machine Information (Local Guidance)"(P. 28)

When Ink End is Displayed

The ink has run out. Replace with new Ink bottle.
Thoroughly read the following and make sure you understand its contents.
"Ink or any Other Liquid Used with the Machine"(P. 11)
• Pay close attention to ventilation and be sure to wear safety glasses, gloves, and a mask when
handling ink, maintenance liquid, waste ink, or other solutions used with the machine. Leaking
ink may adhere to the skin or get into the eyes or mouth.
l Ink Replacement Process
* Mount a new ink bottle, clear the error (ink end or ink near-end), and
register the ink IC chip.
Mount a new ink bottle.
Register the ink IC chip provided with the ink bottle on this machine.
37
Chapter 1 Before Use
1