Detaching The Cover - Toshiba TOSVERT VF-AS1 Instruction Manual

3) Control circuit terminal board
The control circuit terminal board is common to all equipment.
⇒ For details on all terminal functions, refer to Section 2.3.2.

1.3.2 Detaching the cover

Main circuit terminal board cover
To wire the main circuit terminal board for models 200V-15kW or smaller and 400V-18.5kW or smaller, remove the
main circuit terminal board cover in line with the steps given below.
(1)
Open the main circuit terminal board cover.
* To open the cover, lift it with your finger
placed at the part
cover. • @ • @
ST-CC Shorting bar
Control terminal board screw size: M3
on the right side of the
A-9
Serial 4-wire RS485
connector
(2)
90°
(2)
Main circuit terminal board
Remove the main circuit terminal board
cover.
* To remove the cover, turn the screw
securing the cover 90° counterclockwise,
release the lock and lift the cover.
Do not apply excessive force to turn the
screw more than 90°. Failure to observe
this might cause damage. • @ • @
E6581301
1
(1)