Detaching The Cover - Toshiba TOSVERT VF-PS1 Instruction Manual

1.3.2 Detaching the cover

 Main circuit terminal cover
To wire the main circuit terminal for models 200V-15kW or smaller and 400V-18.5kW or smaller, remove the main
circuit terminal cover in line with the steps given below.
(A)
1
Open the main circuit terminal cover.
* To open the cover, lift it with your finger
placed at the part
the cover.
For 200V/0.4kW to 200V/15kW models and 400V/0.75kW to 400V/18.5kW models, cut off the tabs (part A in the
figure below) on the main circuit terminal cover if necessary for connecting the cables from the power supply.
 Front cover
To wire the main circuit terminal for 200V-18.5kW and above models and 400V-22kW and above models, remove
the front cover.
on the right side of
200V-0.4kW~3.7kW
400V-0.75kW~3.7kW
A
Remove the screw
(B)
90°
(2)
Main circuit terminal
Remove the main circuit terminal cover.
(1) Turn the screw securing the cover
counterclockwise by 90° to release the lock
(Do not turn the screw by more than 90°.
Or else the screw might be broken.)
(2) Hold the cover by both ends, and then pull
up the cover with slightly bending it inward.
200V-5.5kW~15kW
400V-5.5kW~18.5kW
Main circuit terminal
A-10
E6581386
(1)
A