Show Protocol-Vlan Protocol-Group - Edge-Core ES3510MA Management Manual

| VLAN Commands
C 34
HAPTER
Configuring Protocol-based VLANs
show protocol-vlan
protocol-group
C M
OMMAND ODE
Interface Configuration (Ethernet, Port Channel)
C U
OMMAND SAGE
When creating a protocol-based VLAN, only assign interfaces via this
◆
command. If you assign interfaces using any of the other VLAN
commands (such as the
traffic of any protocol type into the associated VLAN.
When a frame enters a port that has been assigned to a protocol VLAN,
◆
it is processed in the following manner:
If the frame is tagged, it will be processed according to the standard
■
rules applied to tagged frames.
If the frame is untagged and the protocol type matches, the frame
■
is forwarded to the appropriate VLAN.
If the frame is untagged but the protocol type does not match, the
■
frame is forwarded to the default VLAN for this interface.
E
XAMPLE
The following example maps the traffic entering Port 1 which matches the
protocol type specified in protocol group 1 to VLAN 2.
Console(config)#interface ethernet 1/1
Console(config-if)#protocol-vlan protocol-group 1 vlan 2
Console(config-if)#
This command shows the frame and protocol type associated with protocol
groups.
S
YNTAX
show protocol-vlan protocol-group [group-id]
group-id - Group identifier for a protocol group.
(Range: 1-2147483647)
D S
EFAULT ETTING
All protocol groups are displayed.
C M
OMMAND ODE
Privileged Exec
– 804 –
vlan command), these interfaces will admit