show gvrp
configuration
Editing VLAN Groups
vlan database
Related Commands
garp timer (577)
This command shows if GVRP is enabled.
Syntax
show gvrp configuration [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1-8)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-16)
Default Setting
Shows both global and interface-specific configuration.
Command Mode
Normal Exec, Privileged Exec
Example
Console#show gvrp configuration ethernet 1/7
Eth 1/ 7:
GVRP Configuration : Disabled
Console#
Table 106: Commands for Editing VLAN Groups
Command
vlan database
vlan
This command enters VLAN database mode. All commands in this mode will take
effect immediately.
Default Setting
None
Function
Enters VLAN database mode to add, change, and delete
VLANs
Configures a VLAN, including VID, name and state
– 581 –
Chapter 21
| VLAN Commands
Editing VLAN Groups
Mode
GC
VC