Displaying Software Revisions For Cards; Table 9-3 Determining Firmware Version Numbers From Filenames - Cisco MGX 8850 (PXM1E/PXM45) Configuration Manual

Displaying Software Revisions for Cards

The first example above, 2.0(1), is for released firmware version 2.0, maintenance release 1. The second
example, 2.0(1.255), is for patch 255 to version 2.0, maintenance release 1. The other examples are for
prerelease firmware. Prerelease firmware does not include patches; the maintenance release number is
increased for each software change.
Table 9-3
management commands.
Table 9-3
Filename
ausm_8t1e1_020.000.001.047.fw
axsm_002.000.001.001.fw
axsm_002.000.016-D.fw
cesm_8t1e1_020.000.001.047.fw
frsm_8t1e1_020.000.001.047.fw
frsm_vhs_020.000.001.047.fw
mpsm_t1e1_030.000.000.000.fw
pxm1e_003.000.000.000_bt.fw
pxm1e_003.000.001.000_bt.fw
pxm1e_003.000.001-D_mgx.fw
pxm1e_003.000.014-A1_bt.fw
pxm45_002.000.000.000_bt.fw
pxm45_002.000.001.000_bt.fw
pxm45_002.000.001-D_mgx.fw
pxm45_002.000.014-A1_bt.fw
vism_8t1e1_003.000.000.103-I.fw 3.0(0.103)
Displaying Software Revisions for Cards
This section describes how to display software revision information for the cards in your switch.
Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX 8950, Cisco MGX 8830, and Cisco MGX 8880 Configuration Guide
9-14
shows some example filenames and the correct version numbers to use with the revision
Determining Firmware Version Numbers from Filenames
Version Number for Revision
Management Commands
20.0(1.47)
2.0(1.1)
2.0(16)D
20.0(1.47)
20.0(1.47)
20.0(1.47)
30.0(0.0)
3.0(0.0)
3.0(1.0)
3.0(1)D
3.0(14)A1
2.0(0.0)
2.0(1.0)
2.0(1)D
2.0(14)A1
Release 5.0.10, OL-3845-01 Rev. B0, August 16, 2004
Chapter 9 Switch Operating Procedures