Cisco MGX 8850 (PXM1E/PXM45) Configuration Manual page 584

Additional PXM1E Information Configuration Worksheet
Table E-5
Feature
Line 11 Redundancy Options
Intracard APS
Intercard APS
Line 12 Redundancy Options
Intracard APS
Intercard APS
1. APS can only be configured on optical lines. For PXM1E-4-155, APS can be configured on lines 1 through 4, and on
PXM1E-8-155, APS can be configured on lines 1 through 8. On PXM1E-COMBO, APS can be configured on lines 9 through
12.
2. Enter the slot number for the standalone PXM1E, which is 1 or 2 on Cisco MGX 8830 and 7 or 8 on Cisco MGX 8850
(PXM1E).
3. Valid options
4. Enter the slot number of the primary PXM1E, which is 1 on Cisco MGX 8830 and 7 on Cisco MGX 8850 (PXM1E).
5. Enter the slot number of the secondary PXM1E, which is 2 on Cisco MGX 8830 and 8 on Cisco MGX 8850 (PXM1E).
6. Valid options
Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX 8950, Cisco MGX 8830, and Cisco MGX 8880 Configuration Guide
E-10
Additional PXM1E Card Configuration Parameters (continued)
Parameter
Information
1
Working index
Protection index
3
Mode
Working index
Protection index
6
Mode
1
Configured while
configuring line 11
Working index
Protection index
6
Mode
:
1+1, 1:1, annexB 1+1, or straight cable 1+1
:
1+1, annexB 1+1, or straight cable 1+1
Appendix E Hardware Survey and Software Configuration Worksheets
Value to Configure
2
slot.2.11
2
slot.2.12
4
slot.2.11
5
slot.2.11
4
slot.2.12
5
slot.2.12
Release 5.0.10, OL-3845-01 Rev. B0, August 16, 2004