Diagnostics Tests; Pxm1E Diagnostics Tests - Cisco MGX 8850 (PXM1E/PXM45) Configuration Manual

Diagnostics
Error Type
-------------
Rx HW Err
DTE ProcErr
RAM ERR
The following example shows the display output for the dspdeverrhist command:
MGX8850.7.PXM.a>dspdeverrhist QE1210
PXM
MGX8850
HISTORY ERROR COUNT FOR DEVICE QE1210
------------
Error Type
-------------
Rx HW Err
DTE ProcErr
RAM ERR
HISTORY ERROR COUNT FOR DEVICE QE1210
------- ----- ----- --- ------ ------------------------------------------
Error Type
---------------
Rx HW Err
DTE ProcErr
RAM ERR
MGX8850.8.PXM.a > dspdiagtests
-------------------------------------------
Id TestName
-- --------
1 Utopia Test
2 Path Test
3 Xbar Test
4 Trap Freq Monitor
5 Memory Access
6 Elmer Access
7 Flash Checksum
8 Ethernet Ping
9 QE RAM Access
10 HDD PCI Access
11 HDD R/W
12 CBC RAM Access
13 BRAM Checksum
MGX8850.8.PXM.a >

Diagnostics Tests

This section lists the diagnostics tests for the PXM1E and PXM45.

PXM1E Diagnostics Tests

The following tests are valid on the PXM1E.
Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX 8950, Cisco MGX 8830, and Cisco MGX 8880 Configuration Guide
G-4
Total Errors
-------- -------
0
0
0
System Rev: 04.00
Node Alarm: CRITICAL
----- ----- --- ------ --------------
Total Errors
------- ------
0
0
0
Total Errors
------- ------
0
0
0
Online Diagnostic Tests
Appendix G Reliability, Availability, and Serviceability
Dec. 19, 1999 07:32:33 GMT
(1)
(0)
Release 5.0.10, OL-3845-01 Rev. B0, August 16, 2004