Axsm Configuration Worksheet; Table E-7 General Axsm, Axsm-E, And Axsm-Xg Card Configuration Parameters - Cisco MGX 8850 (PXM1E/PXM45) Configuration Manual

AXSM Configuration Worksheet

AXSM Configuration Worksheet
Table E-7
Note AXSM cards operate only on Cisco MGX 8850 (PXM45) and Cisco MGX 8950 switches, and on the
Cisco MGX 8880 Media Gateway. The Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX 8950, Cisco
MGX 8830, and Cisco MGX 8880 Hardware Installation Guide, Releases 2 Through 5 describes which
AXSM cards operate in which switches. If you are configuring a Cisco MGX 8850 (PXM1E) or
Cisco MGX 8830 switch, or if you do not have AXSM cards installed in your switch, you do not need
to fill out
Table E-7
Feature
Slot for this AXSM
AXSM type
Software Version Data
Card Redundancy Options
Card SCT
Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX 8950, Cisco MGX 8830, and Cisco MGX 8880 Configuration Guide
E-12
lists general switch parameters you will need to configure on each AXSM card.
Table E-7.
General AXSM, AXSM-E, and AXSM-XG Card Configuration Parameters
Boot software
Runtime software
Standalone configuration Yes or no?
Redundant configuration
Card role
Card slot for other
half of redundant
card pair
APS connector
installed?
Appendix E Hardware Survey and Software Configuration Worksheets
Parameter
Information Value to Configure
Slot number
AXSM, AXSM/B,
AXSM-E or
AXSM-XG
Version number
Version number
Primary or secondary
Slot number
Yes or no?
SCT number
Release 5.0.10, OL-3845-01 Rev. B0, August 16, 2004