Cesm Configuration Worksheet - Cisco MGX 8850 (PXM1E/PXM45) Configuration Manual

Appendix E Hardware Survey and Software Configuration Worksheets

CESM Configuration Worksheet

Table E-8
Note CESM cards do not operate in Cisco MGX 8950 switches. If you are configuring a Cisco MGX 8950
switch, or if you do not have CESM cards installed in your switch, you do not need to complete the
worksheet in
Table E-8
Feature
Slot for this CESM
Software Version Data
Card Redundancy Options
Line distribution
Release 5.0.10, OL-3845-01 Rev. B0, August 16, 2004
lists general switch parameters you will need to configure on each CESM card.
Table E-8.
General CESM Configuration Parameters
Boot software
Runtime software
Standalone configuration Yes or no?
1:N Redundant configuration
Card role
Card slot for other
half of redundant
card pair
Cisco MGX 8850 (PXM1E/PXM45), Cisco MGX 8950, Cisco MGX 8830, and Cisco MGX 8880 Configuration Guide
Parameter
Information Value to Configure
Slot number
Version number
Version number
Primary or secondary
Slot number
Mode: back card or
bulk distribution
through an SRM
CESM Configuration Worksheet
E-13